optoway SPM-9100FG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 v2.0 1 SPM-9100FG (rohs compliant) 3.3v / 850 nm / 2.125 gbps sfp lc multi-mode transceiver ********************************************************************************************************************************************************************** features l hot-pluggable sfp footprint lc optical transceiver l small form-factor pluggable (sfp) msa compatible l compliant with fiber channel fc-ph-2 for 200-m5-sn-1 and 200-m6-sn-1 l compliant with ieee 802.3z gigabit ethernet 1000base-sx l link distance at 2.125 gbd 150 m links with 62.5/125 m m mmf cables 300 m links with 50/125 m m mmf cables l link distance at 1.026 gbd 300 m links with 62.5/125 m m mmf cables 500 m links with 50/125 m m mmf cables l ac/ac coupling according to msa l single +3.3 v power supply l rohs compliant l -10 to 85 o c operation l class 1 laser international safety standard iec 60825 compliant applications l gigabit ethernet switches and routers l fiber channel switch infrastructure l xdsl applications l metro edge switching description the SPM-9100FG series multi-mode transceivers is small form factor pluggable module for bi-directional serial optical data communications such as gigabit ethernet 1000base-sx and fiber channel fc-ph-2 for 200-m5-sn-1 and 200-m6-sn-1. it is with the sfp 20-pin connector to allow hot plug capability. this module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. the transmitter section uses a vertical cavity surface emitted laser (vcsel) and is a class 1 laser compliant according to international safety standard iec 60825. the receiver section uses an integrated gaas detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. laser safety this multi-mode transceiver is a class 1 laser product. it complies with iec 60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (gb/s) fc-pi distance (m) wavelength (nm) package temp. ( o c) tx power (dbm) rx sens. (dbm) rohs compliant SPM-9100FG 2.125/1.063 200/100 150/300 ** 850 lc sfp -10 to 85 -4 to -9.5 -15 yes * : 150 meter for 62.5/125 m m mm fiber; 300 meter for 50/125 m m mm fiber. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating case temperature topr -10 85 o c air flow 1m/sec power supply voltage vcc -0.5 3.6 v recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.1 3.3 3.5 v case operating temperature topr -10 85 o c / air flow 1m/sec power supply current i cc (tx+rx) 250 ma data rate 1000 2125 mb/s
opto way SPM-9100FG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 v2.0 2 transmitter specifications (-10 o c < topr < 85 o c, 3.1v < vcc < 3.5v) parameter symbol min typ max units notes optical optical transmit power po -9.5 --- -4 dbm 1 output center wavelength l 830 860 nm output spectrum width dl --- --- 0.85 nm rms ( ) optical modulation amplitude oma 196 m w 2 extinction ratio e r 9 --- db optical rise time t r 160 ps 20 % to 80% values optical fall time t f 160 ps 20 % to 80% values relative intensity noise rin -120 db/hz electrical data input current C low i il -350 m a data input current C high i ih 350 m a differential input voltage v ih - v il 0.5 2.4 v peak-to-peak tx disable input voltage C low t dis, l 0 0.5 v 3 tx disable input voltage C high t dis, h 2.0 vcc v 3 tx disable assert time t assert 10 m s tx disable deassert time t deassert 1 ms tx fault output voltage -- low t faultl 0 0.5 v 4 tx fault output voltage -- high t faulth 2.0 vcc+0.3 v 4 1. output power is power coupled into a 62.5/125 m m mm fiber. 2. an oma of 196 m w is approximately equal to an average power of -9 dbm assuming an extinction ratio of 9 db. 3. there is an internal 4.7k to 10k ohm pull-up resistor to vcctx. 4. open collector compatible, 4.7k to 10k ohm pull-up to vcc (host supply voltage). receiver specifications (-10 o c < topr < 85 o c, 3.1v < vcc < 3.5v) parameter symbol min typ max units notes optical optical modulation amplitude sens 40 m w 5 stress rx sens 96 m w fc-pi std. maximum input power pin -3 0 dbm signal detect -- asserted pa --- -16 dbm transition: low to high signal detect -- deasserted pd -30 --- --- dbm transition: high to low signal detect -- hysteresis 1.0 --- db wavelength of operation 700 --- 900 nm electrical differential output voltage v oh C v ol 0.6 2.0 v output los voltage -- low v ol 0 0.8 v 6 output los voltage -- high v oh 2.0 vcc+0.3 v 6 5. an oma of 40 m w is approximately equal to an average power of -17 dbm assuming an extinction ratio of 9 db. 6. open collector compatible, 4.7k to 10k ohm pull-up to vcc (host supply voltage).
opto way SPM-9100FG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 v2.0 3 connection diagram pin signal name description pin signal name description 1 tx gnd transmitter ground 11 rx gnd receiver ground 2 tx fault transmitter fault indication 12 rx data out- inverse receiver data out 3 tx disable transmitter disable (module disables on high or open) 13 rx data out+ receiver data out 4 mod-dfe2 modulation definition 2 C two wires serial id interface 14 rx gnd receiver ground 5 mod-def1 modulation definition 1 C two wires serial id interface 15 vcc rx receiver power C 3.3v 5% 6 mod-def0 modulation definition 0 C ground in module 16 vcc tx transmitter power C 3.3v 5% 7 n/c not connected 17 tx gnd transmitter ground 8 los loss of signal 18 tx data in+ transmitter data in 9 rx gnd receiver ground 19 tx data in- inverse transmitter data in 10 rx gnd receiver ground 20 tx gnd transmitter ground module definition module definition mod-def2 pin 4 mod-def1 pin 5 mod-def0 pin 6 interpretation by host 4 sda scl lv-ttl low serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, mod-def(1:2) appear as no connector (nc) and mod-def(0) is ttl low. when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
opto way SPM-9100FG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 v2.0 4 recommended circuit schematic 10nf 10 f 10nf 10 f veer post amp ld driver z=50 z=50 z=50 z=50 veet 1 h 1 h td - td + vcct vccr rd - rd + 100 sfp module serdes 100 los rd - rd + td - td + 10nf 10 f protocol eeprom module detect scl sda loss of singal tx_disable tx_fault mod_def(0) mod_def(1) mod_def(2) 4.7k to 10k 4.7k to 10k 4.7k to 10k 4.7k to 10k tx_fault tx_disable (1,17,20) 3 2 18 19 16 15 12 13 8 (9,10,11,14) 6 5 4 4.7k to 10k vcc 3.3v vcc 3.3v ic ic depending on serdes package diagram units in mm note: specifications subject to change without notice.
opto way SPM-9100FG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 v2.0 5 revision history version subject release date 1.0 initial datasheet 2005/12/1 2.0 revise package diagram for high port density use 2008/1/1
|
